OSHKOSH, Wis. -- (BUSINESS WIRE) -- One of the U.S. Army’s top priorities is ensuring the right information is available in any environment down to the lowest tactical level on the battlefield. Oshkosh Defense, a division of Oshkosh Corporation (NYSE:OSK), is demonstrating its C4 and systems integration capabilities to connect soldiers to the network on its MRAP All-Terrain Vehicle (M-ATV) this week at the Association of the U.S. Army (AUSA) 2013 Annual Meeting and Exposition in Washington, D.C.
Unlike a third-party aftermarket integration approach, which requires vehicle disassembly and a trial-and-error design approach, Oshkosh Defense integrates C4 equipment and a full range of weapons and other systems in the initial vehicle design process to reduce potential system conflicts or interference. Complete assembly line installation and quality control processes also eliminate the cost and quality issues related to tearing apart and reassembling the vehicle to run wiring harnesses and connectors.
“Oshkosh’s ‘first pass’ systems integration approach optimizes the overall vehicle and C4 package design to deliver a fully integrated solution that puts the network at the soldiers’ fingertips to support their missions,” said John Urias, executive vice president of Oshkosh Corporation and president of Oshkosh Defense. “This integrated approach, which we utilized for our JLTV EMD vehicles, offers greater value for our military customer, a more ergonomic design for the soldier and enables rapid fielding of vehicles with integrated C4ISR suites.”
For its Joint Light Tactical Vehicle (JLTV) solution, Oshkosh Defense developed multiple JLTV mission package configurations. The 22 JLTV prototypes that Oshkosh delivered to the government in August for the Engineering and Manufacturing Development (EMD) phase were fully integrated and tested by Oshkosh.
Responding to an urgent need in Afghanistan for the MRAP All-Terrain Vehicle (M-ATV) in 2009, Oshkosh Defense delivered its M-ATVs pre-wired and ready for C4 equipment. This contributed to the life-saving vehicles being designed, produced and delivered at a rate of more than 1,000 per month, all in less than one year’s time.
Oshkosh Defense has a dedicated team of C4 and integration specialists who are knowledgeable of the entire range of vehicle systems and requirements. The company considers the impact of the systems and other equipment in the vehicle’s 3D modeling and design process, and systems are designed for future growth, enabling vehicles to accept expanded or updated C4 systems without intrusive effects on the vehicle itself. Oshkosh Defense also can install the C4 and other systems in-house, eliminating the need for a third-party integrator.
A fully integrated Oshkosh M-ATV will be on display at the Oshkosh Defense AUSA booth #6943. Oshkosh Defense representatives also will be on hand to discuss the company’s advanced integration capabilities.
About Oshkosh Defense
Oshkosh Defense is a leading provider of tactical wheeled vehicles and life cycle sustainment services. For more than 90 years, Oshkosh has been mobilizing military and security forces around the globe by offering a full portfolio of heavy, medium, light and highly protected military vehicles to support our customers’ missions. In addition, Oshkosh offers advanced technologies and vehicle components such as TAK-4® independent suspension systems, TerraMax™ unmanned ground vehicle solutions, Command Zone™ integrated control and diagnostics system, and ProPulse® diesel electric and on-board vehicle power solutions, to provide our customers with a technical edge as they fulfill their missions. Every Oshkosh vehicle is backed by a team of defense industry experts and complete range of sustainment and training services to optimize fleet readiness and performance.
To learn more about Oshkosh Defense, please visit us at www.oshkoshdefense.com.
About Oshkosh Corporation
Oshkosh Corporation is a leading designer, manufacturer and marketer of a broad range of specialty access equipment, commercial, fire & emergency and military vehicles and vehicle bodies. Oshkosh Corporation manufactures, distributes and services products under the brands of Oshkosh®, JLG®, Pierce®, McNeilus®, Jerr-Dan®, Frontline™, CON-E-CO®, London® and IMT®. Oshkosh products are valued worldwide in businesses where high quality, superior performance, rugged reliability and long-term value are paramount. For more information, log on to www.oshkoshcorporation.com.
®, TM All brand names referred to in this news release are trademarks of Oshkosh Corporation or its subsidiary companies.
This press release contains statements that the Company believes to be “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. All statements other than statements of historical fact, including, without limitation, statements regarding the Company’s future financial position, business strategy, targets, projected sales, costs, earnings, capital expenditures, debt levels and cash flows, and plans and objectives of management for future operations, are forward-looking statements. When used in this press release, words such as “may,” “will,” “expect,” “intend,” “estimate,” “anticipate,” “believe,” “should,” “project” or “plan” or the negative thereof or variations thereon or similar terminology are generally intended to identify forward-looking statements. These forward-looking statements are not guarantees of future performance and are subject to risks, uncertainties, assumptions and other factors, some of which are beyond the Company’s control, which could cause actual results to differ materially from those expressed or implied by such forward-looking statements. These factors include the cyclical nature of the Company’s access equipment, commercial and fire & emergency markets, especially in the current environment where there are conflicting signs regarding the global economic outlook and the ability of the U.S. government to resolve budgetary and debt issues; the expected level and timing of the DoD procurement of products and services and funding thereof; risks related to reductions in government expenditures in light of U.S. defense budget pressures, sequestration and an uncertain DoD tactical wheeled vehicle strategy, including the Company’s ability to successfully manage the cost reductions required as a result of the significant projected decrease in sales levels in the defense segment; the Company’s ability to win a U.S. Joint Light Tactical Vehicle production contract award; the Company’s ability to increase prices to raise margins or offset higher input costs; increasing commodity and other raw material costs, particularly in a sustained economic recovery; risks related to facilities consolidation and alignment, including the amounts of related costs and charges and that anticipated cost savings may not be achieved; the duration of the ongoing global economic weakness, which could lead to additional impairment charges related to many of the Company’s intangible assets and/or a slower recovery in the Company’s cyclical businesses than Company or equity market expectations; risks related to the collectability of receivables, particularly for those businesses with exposure to construction markets; the cost of any warranty campaigns related to the Company’s products; risks related to production or shipment delays arising from quality or production issues; risks associated with international operations and sales, including foreign currency fluctuations and compliance with the Foreign Corrupt Practices Act; the Company’s ability to comply with complex laws and regulations applicable to U.S. government contractors; and risks related to the Company’s ability to successfully execute on its strategic road map and meet its long-term financial goals. Additional information concerning these and other factors is contained in the Company’s filings with the Securities and Exchange Commission. All forward-looking statements speak only as of the date of this press release. The Company assumes no obligation, and disclaims any obligation, to update information contained in this press release. Investors should be aware that the Company may not update such information until the Company’s next quarterly earnings conference call, if at all.